Hi @modaltb, is there any updates on this?
Latest posts made by xav04
-
VOXL IO and SDK 1.0.0 on VOXL 2
Hi, I was using SDK 0.9.5 with VOXL IO where I had connected an S-BUS RC and a servo. Now, it seems that the VOXL IO is stuck in standby mode. How can i solve this problem?
-Thanks!
-
RE: Connect the VOXL 2 I/O using the UART port on the 5G modem
@Eric-Katzfey Hi, just wanted to ask if you can help me to connect VOXL 2 I/O or any other device that uses a UART port to the J9 on the 5G modem.
-
RE: Connect the VOXL 2 I/O using the UART port on the 5G modem
@tom Any advice? I still can't connect any device to the J9 UART port in the 5G modem
-
RE: Connect the VOXL 2 I/O using the UART port on the 5G modem
@tom I was able to connect Voxl 2 I/O using the J19 UART on Voxl 2 (proving that the Voxl I/O works), but none of the devices I've tried connecting to the J9 port on the 5G modem have worked so far. The problem is "how to connect any device to J9 port on the 5G modem"
-
RE: Connect the VOXL 2 I/O using the UART port on the 5G modem
@tom Thanks! I followed the instructions, but the Voxl 2 I/O is still in waiting mode. This is a screenshot of the voxl-mavlink-server.conf file and the voxl-mavlink-server status, it's enable and running. Please let me know how to fix this.
I'm using voxl-suite: 0.9.5
-
Connect the VOXL 2 I/O using the UART port on the 5G modem
Hi everyone, I have been trying to connect the VOXL 2 I/O to the J9 UART/I2C port on the 5G modem but it doesn't work. Is there a way to use the UART port on the 5G modem?
-
RE: ToF sensor and VOA
Hi @Alex-Gardner this is the screenshot of
voxl_pc_out
in voxl-portal, at the same time this is the output ofvoxl-vision-px4 -s
and this is the screenshot/etc/modalai/extrinsics.conf
-
RE: ToF sensor and VOA
@Alex-Gardner I'm wondering if you can help me solve this problem or is there someone else on the development team who can provide support?