How to use PCA9685 with voxl
-
Hi we have voxl flight controller i.e inspired flight (IF1000). we are planning to control servo in main PWM outputs but we are not successful. after that, we are planning to use PCA9685 to voxl flight core. how to integrate PCA9685 to voxl is there any manual or wiki is there, if yes please send links.
thank you in advance
-
@SWARNA-MOHAN-CHANDRA-KANTH said in How to use PCA9685 with voxl:
PCA9685
Seems like that is an I2C device, you could start looking here at how to control an I2C bus from VOXL:
VOXL I2C
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
How are you looking to control this and for what use case? Above assumes you are running the I2C program on the VOXL's processor (not PX4).
If using PX4, you'd want to do this in the PX4 firmware instead.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login