Collision Prevention

[gauravshukla914]

@Alex-Gardner Also, just to let you know, we have the stereo camera replaced, so we have attempted the stereo calibration once. And we pushed the files to VOXL.
When I do on - voxl-dfs-server I get this
voxl-dfs-server

skip_n_frames: 5
n_disparity_levels: 48

Failed to open calibration file: /data/modalai/opencv_stereo_intrinsics.yml

But the calibaration method that we performed pushes left.yaml and right.yaml files. Is there anything wrong that I'm doing?

[gauravshukla914]

Update - we were able to push the opencv_intrinsics.yml. But when I do voxl-inspect-services, it still shows dfs server enabled, but not running.

[gauravshukla914]

Update - we are able to get the obstacle data printed on the terminal. But this only comes when we run the voxl-dfs-server in one terminal and then run voxl-vision-px4 -s in other terminal.
Do we have to always run voxl-dfs-server in one window for this?

[A Former User]

voxl-dfs-server and voxl-vision-px4 should run in the background just fine if they're marked as enabled in voxl-inspect-services. If you boot the voxl and see that dfs server is enabled but not running, then can you paste the output of journalctl -u voxl-dfs-server so we can see why it's aborting

[gauravshukla914]

@Alex-Gardner its now perfectly running on boot up. Thanks for the help.

[gauravshukla914]

@Alex-Gardner I want to check the stereo disparity. However, when I do the voxl streamer -c dfs-server, the stream is getting stuck on the the VLC media player. How do I see the disparity output?

[A Former User]

The config option is dfs-disparity not dfs-server

[Daniel Ryu]

@Alex-Gardner Different guy, but I followed the same steps as above and am also just getting a black screen on the VLC player for

voxl-streamer -c dfs-disparity

Everything else seems to be working fine when I run voxl-inspect-services (you can see my status here https://forum.modalai.com/topic/409/obstacle_detection-messages-not-appearing/3).

I would like to have collision avoidance integrated onto my drone for a time sensitive project, but the documentation for voxl-dfs-server is not yet present and I am out of resources to turn to.

[Prasad Antervedi]

@gauravshukla914 Hi! I am also getting the same error (i.e. "Failed to open calibration file: /data/modalai/opencv_stereo_intrinsics.yml" ). How did you manage to get the opencv_stereo_intrinsics.yml file. Did you write it yourself?
Thanks in advance

[gauravshukla914]

@Prasad-Antervedi as far as I rember we calibrated the stereo cameras and then pushed the resulting files into voxl.

[Daniel Ryu]

@Prasad-Antervedi Try following these: https://docs.modalai.com/calibrate-cameras/