ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Waiting for EDL device

    VOXL 2
    2
    2
    285
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Jonathan DavisJ
      Jonathan Davis
      last edited by

      I'm trying to re-flash the starling v2 voxl2 board by following the instructions here: https://docs.modalai.com/voxl2-unbricking/ .
      When I get to the step where I run

      "sudo qdl --debug --storage ufs --include . prog_firehose_ddr.elf rawprogram_unsparse0.xml rawprogram1.xml rawprogram2.xml rawprogram3.xml rawprogram4.xml rawprogram5.xml patch0.xml patch1.xml patch2.xml patch3.xml patch4.xml patch5.xml"

      it waits indefinitely, and doesn't print. ADB does not work, the last time I ssh'd in, and I had no read out from the command voxl-inspect-battery. Should there be prints while it is flashing, or is it just blank output until it is done? How should I proceed?

      N 1 Reply Last reply Reply Quote 1
      • N
        Nathan Raras ModalAI Team @Jonathan Davis
        last edited by Nathan Raras

        Hi @Jonathan-Davis,

        Our Starling v2 VOXL 2 board requires this flat build image (M0054-2 Starling QDL Image 1.7.4) which is available in our protected downloads as well as in the unbricking documentation here where you can proceed with the same step-by-step instructions. When finished, the qdl command should complete and the terminal should output "partition 1 is now bootable" indicating a successful QDL flash.

        Hope this helps!

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Powered by NodeBB | Contributors