Amprius Silicon Anode Charge instruction and Discharge curve
-
I have a Starling 2 and am using the 2S amprius silicon anode modalai battery that shipped with the drone. Says 3A charge, 4.2V/cell max, and 2.55V/cell min
Am I correct to be charging this with a standard LiPo balance charger with 3A to 4.2V/cell? That’s what I’ve been doing.
The 2.55V/cell is lower than I’m familiar with for lithium ion or polymer cells. Is there information available that shows the discharge voltage profile for these cells? Would you want to stop flying at 2.55V/cell? Or is this the absolute minimum you can reach before permanent damage occurs? I have been getting down to 3.7 or 3.6 v/cell and I start getting nervous that it will drop off quick, so I stop and charge.
Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login