@tom , may I know what is the likely component that might need to replace to resolve this issues as the RMA cost of sending the drone may outweigh the replacement.
C
Posts made by ck
-
RE: Unbrick Voxl2posted in Ask your questions right here!
-
RE: QGroundControl parameters are missing from firmwareposted in Starling & Starling 2
@Eric-Katzfey , i have flash the starling2 image to the drone and has recovered the firmware but has lost the calibration files and remote control link. Possible to send al factory calibration files to configure the drone again? (voxl-imu-server.cal, opencv_tracking_intrinsics.yml and the various parameters files)
-
RE: QGroundControl parameters are missing from firmwareposted in Starling & Starling 2
@Eric-Katzfey , I have just received the VOXL 2 Starling Indoor and Outdoor SLAM & Autonomy Development Drone and is trying to get the first test flight. Seems to me also I have no radio controller binding. Possible to guide me through the troubleshooting guide as I only have the youtube video guide to setup?
-
QGroundControl parameters are missing from firmwareposted in Starling & Starling 2
Hi, I am able to connect via ADB and wifi QGroundControl. Upon connection, QQroundControl shows a popup as follows, may I know how can I resolve these errors?
