@tom I haven't tried the ethernet port yet. I have used the physical USB port with a WiFi dongle and that worked well.
Latest posts made by AidanGallagher
-
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
-
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
@tom that's cool we will take a look at that in the future.
Any idea why I cannot use the J12 port on the ethernet expansion board? -
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
This solution doesn't work
-
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
That's my working solution
-
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
@tom ill do that tomorrow when I'm back in the office
-
RE: VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
@tom Cannot ping the modem and I am certain its a free IP address.
I tried a USB Expansion Board with Fastboot v2 I had on another setup and it works so the issues does seem to be on related to this board.
Is there a jumper I need to set to enable the J12 header?Regards
Aidan -
VOXL 2 Ethernet and USB Hub Add-on with Doodle lab radio
Hi,
Can I connect a doodle lab radio to the J12 connector on the Ethernet and USB Hub board?
I have connected it and ran voxl-configure-modem
When I check ifconfig eth0 the IP details looks correct but I cannot ping any other IP address on the Doodle network.
Regards
Aidan -
RE: Change the default frame rate of IMX412 and the image fov changes
Thanks a million @Alex-Kushleyev that certainly explains the effect - I really appreciate you taking the time