@Vinny Finally I got the goals. I really appreciate you. Check one more time please.

@Vinny Can you open the schematic of M0076 AXT Interposer schematic for easy debugging? Here is the schematic and made pcba but I can only one camera.

@Vinny Actually I had a schematic and pcba and test now before asked schematics. In this case I could see stream of two camera and working well. If you have any comments on this, tell me thank you.

@Vinny Thank you for your fast reply. I am going to use below site cable and need further schematic check.
https://leopardimaging.com/product/accessories/cables/faw-1212-t1/

@Vinny Can you check again the schematic?

I would like to make sub board like attached picture because out system is too small and cannot install interposer board (M0076). Would you tell me how to connect each signal? (In schematic J1<->J4)

Hello
I would like to test VOXL2 main board and PCIe 5G M.2 card.
Below is the pin map of the 5G card and VOXL2 external connector pin map.
Actually I don't have alternative pin map of VOXL2, so I want to receive pin mapping information just like PCIE_RESET, PCIE_CLKREQ include S/W for PCIe porting.
Thank you.