Avoidance
-
I'm not able to activate flight mode on QCG. The error message is saying: Avoidance System not ready.
The Not Ready error message shows GPS is disabled, Gyro 2 is disabled, and Accelerometer 2 is disabled.
Do I need these enabled for flight mode?
If so, how do I enable them? -
I'm not able to activate flight mode on QCG. The error message is saying: Avoidance System not ready.
The Not Ready error message shows GPS is disabled, Gyro 2 is disabled, and Accelerometer 2 is disabled.
Do I need these enabled for flight mode?
If so, how do I enable them?You might also want to look into combining depth sensing with a simple occupancy grid or voxel map instead of relying only on direct obstacle detection. It usually gives smoother avoidance behavior, especially in tighter spaces. I had better results once I started filtering noisy sensor data too.
-
I'm not able to activate flight mode on QCG. The error message is saying: Avoidance System not ready.
The Not Ready error message shows GPS is disabled, Gyro 2 is disabled, and Accelerometer 2 is disabled.
Do I need these enabled for flight mode?
If so, how do I enable them?@Ward-Javoronok How is the parameter COM_OBS_AVOID set? If you set it to 0 that disables obstacle avoidance and should get rid of that error.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login