PX4 UART Warning
-
While testing with VOXL and a Flight Core -- I am remote to the tester -- we performed a system image update so I could install some of the new variants of libraries the ModalAI team has been working on.
Once we did that and walkthrough the MPA configuration wizard, we began getting out of
vixl-vision-px4:WARNING PX4 DISCONNECTED FROM UARTI've checked the port configurations and it all looks good. The flight core has solid green and blinking blue LED so it looks like its alive. Any thoughts on what we are missing as far as config? I'm out of ideas! Thanks for any help.
I'll get the unit back in a week or so and can use the PX4 debug cable to dig further.
-
@Steve-Turner
hey, Steven, have you solved your issue?I am currently facing the same issue with you .
https://forum.modalai.com/topic/1103/px4-disconnected-from-uart-qgc-cannot-connected-to-modalai?_=1657381522102 -
@DarkKnightCH I have not yet, but will be getting that system back to see what the issue was. Will let you know what I find.
-
@DarkKnightCH to followup on this -- a reflash of the VOXL Flight Core solved the problem for me. It was in an unresponsive state and I was unable to change parameters or talk to the Flight Core until I reflashed the current release of firmware from ModalAI.
