DRONE NOT RISING TO SET ALTITUDE
-
HI support,
I have a starling 2 drone with ros2 installed. I ran a ros2 script giving the drone a position command of (0,0,-1.5), i want to believe its NED convention, and i plotted the the commanded Z position vs the actual Z position, I realized my drone (i was using HITL) doesnt climb to the set altitude, it stops at around 0.8m and starts doing a figure eight motion. I believe if i change the offboard_mode from figure eight to off/none, it shouldnt do that anymore(using sudo nano /etc/modalai/voxl-vision-hub.conf). But regarding the drone not climbing to the commanded position, i tried ros2 topic echo/fmu/out/vehicle_local_position, i got;
xy_valid : true
z_valid : true
heading_good_for_control : falseThis made me wonder if the issue was because heading_good_for_control is false. Kindly advise.
Best Regards
Taiwo
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login