@modaltb said in offboard mode in voxl m500:
l-vision-px4 program
Oh I see, I had tried it worked with marvos, in offboard mode. But the altitude of voxl m500 was incorrect 
In my code, I set altitude is 0.3m and QGC show exactly (in POSITION_TARGET_LOCAL_NED) but m500 flew up to 0.5m, and sometime it sliped from home_position. Do you have any solution ??
@modaltb I had been used MAVROS example but before that I change offboard_mode to OFF as this picture 
Hi,
I still get some problem, first I change offboard_mode in config to OFF then I use my mavros file but it seem didn't work right. The UAV can only arm then disarm. when I check in Qgroundcontrol, I couldn't change to Offboard mode.I had tried again but it still didn't change. How to solve this problem??
Thank you
Thanks for the fast reply.
I want to use my own offboard mode so I change figure_eight in file config to OFF but when I tested QGC can't turn to offboard mode ??
Hello.
I am just wondering, in offboard mode there are any mode that difference than figure_eight ?? If not how I can write and add my own offboard mode to voxl m500.
Thank you!!!
oh I see thank you. And do you know how much weight that VOXL m500 drone can lift. Thank you !!!
Hello !! I followed VOXL m500 instruction changed QGC to Position Mode . When I use takeoff mission but I can not change the Altitude
of takeoff mission (I had changed to 0.5 m but the UAV still head up to 2.5m )
Please show me how to change the alt
@modaltb said in Can' connect between FrSKY D4R-II and flight core m500:
X8R
I wired as picture and followed the doc as you send. But I still can't use my transmiter to control it eventhough led from RC was green. I still can't find the problem . Please help me
@modaltb oh I see. Thank you and I will try to do it