ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login
    1. Home
    2. Nando75
    N
    • Profile
    • Following 0
    • Followers 0
    • Topics 0
    • Posts 5
    • Best 0
    • Controversial 0
    • Groups 0

    Nando75

    @Nando75

    0
    Reputation
    2
    Profile views
    5
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Nando75 Unfollow Follow

    Latest posts made by Nando75

    • RE: M0181 Pin Out and Electrical Diagram

      @Vinny , I have the schematics ready for review. I will wait for your email to share them with you.

      Regards and thanks in advance,
      Fernando

      posted in Support Request Format for Best Results
      N
      Nando75
    • RE: M0181 Pin Out and Electrical Diagram

      @Vinny,

      We are moving forward with JAE Electronics flex cables.

      Regarding the pinout for the Camera Connectors, I have a question about the MIPI Lanes. We intend to connect the IR and Visible MIPI lanes from the HADRON 640 to the VOXL2. Additionally, we will connect the I2C lines to control the camera.

      My primary question is: Can I utilize only one camera group, or will two camera groups be necessary? If a single camera group is feasible, I plan to use one 51-pin Flexible Cable (https://www.digikey.com/en/products/detail/jae-electronics/JF08R0R051040UA/9477713) to connect our breakout board to an adapter PCB for the Hirose connector.

      This information is crucial for us to begin the schematic design.

      Regards,

      Fernando

      posted in Support Request Format for Best Results
      N
      Nando75
    • RE: M0181 Pin Out and Electrical Diagram

      @Vinny , and what about using this kind of flex cable https://www.digikey.com/en/products/detail/jae-electronics/JF08R0R051040UA/9477713 ?
      It is supposed that it has an impedance of 100 ohms between pairs

      Thanks in advance,
      Fernando

      posted in Support Request Format for Best Results
      N
      Nando75
    • RE: M0181 Pin Out and Electrical Diagram

      Thanks, @Vinny, for your help.

      Just to confirm, you're suggesting that an IPEX cable assembly like this one (https://www.digikey.com/en/products/detail/i-pex/81457-100B-02-D/22108838?gclsrc=aw.ds&gad_source=1&gad_campaignid=203759898&gbraid=0AAAAADrbLljG_0DgosYmSjn-L6wfiInDx&gclid=CjwKCAjwxrLHBhA2EiwAu9EdMyI0xVm4X54JIAOikP3zqiHT_KgnCN1m9s6Gd_ba0VRVhewe2lowKxoCYHAQAvD_BwE), with a length of 200mm (slightly longer than your suggested 180mm), could work if each line of the differential pair is carried over a separate coaxial cable.

      Regards,

      Fernando

      posted in Support Request Format for Best Results
      N
      Nando75
    • RE: M0181 Pin Out and Electrical Diagram

      Hello @Vinny , I am Fernando, and I am working on this project.

      There was an error regarding the Impedance of the I-PEX cable. Each Micro-Coaxial has an impedance of 50 ohms, and for sure, the cable you are using is also 50 ohms.

      My question is, how are you connecting each 100-ohm differential pair from the MIPI interface through each coaxial line?

      Regards and thanks in advance

      posted in Support Request Format for Best Results
      N
      Nando75