@Jacob-Camarillo it was the transmitter FW version, shouldn't troubleshoot late at night...... up and running

@Bilal-Hussain considering you started this post thinking a Microhard is compatible with an MPU5 (They are 100% not compatible) maybe slow down just a bit and reach out to Doodle Labs to see what antennas they recommend for your use case.

Also maybe ask Doodle Labs what their rugged ground radio is going to cost you so you're know it's within your budget.

@Chad-Sweet Thanks! It would be helpful if i could update the title of my forum post with [SOLVED] at the end just so people know you guys have answered the question

The GNB 3000mAh 2S XT30 packs are a little hard to source online (should've bought the full kit to avoid these issues). If there is a known source users could buy these from it would be great to know even......AliExpress or Banggood if that is what it comes down to.

@Jacob-Camarillo it was the transmitter FW version, shouldn't troubleshoot late at night...... up and running

Using taranis x9d+ 2019 with betafpv micro 900mhz external module.

1. Updated OpenTX to 2.3.14, set external module to crsf https://oscarliang.com/setup-expresslrs-2-4ghz/#Download-ExpressLRS-Configurator
2. Followed instructions, reciever went into bind mode https://www.google.com/url?q=https://www.youtube.com/watch%3Fv%3D7OwGS-kcFVg&sa=U&ved=2ahUKEwjyjZO5762AAxWRElkFHV8BCtAQtwJ6BAgGEAE&usg=AOvVaw1VeFRqtAwILSbUS2Pxcvnk
3. When running elrs lua script on taranis no bond, just cycles through attempt and stops
4. I tried matching the elrs settings I could see in video but its possible I missed something.

Looking to see if anyone has run into this and has any ideas.