My Sentinel crashed during simple missions with "Failsafe activated, triggering descend"
-
Hi, here is the full message
.Also sometimes the following was encountered:
.When I tried few simple missions, not sure why this happened only at certain points or certain directions? Also not sure why both local and global position estimates failed at the same time?
-
I suspected probably it is because of the fused local position by vision and searched in parameter. It sounds
EKF2_GPS_CTRLis probably relevant. So, I set it to be 0 from 7. After trying that, my outdoor missions were all smooth without any accident.I then set it back to 7 and tried flying in position mode. This error happened again and with altitude mode was forced.
So, anybody here know how to fix the problematic local position estimate? This is an AI drone and it shouldn't perform worse than drones without any vision.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login