Hello I am in the process of integrating your voxel 2 mini. I need to connect to it wirelessly or wired if i am able to log into mission planner via the ADB connection /USB C port?

J3 - USB3 10-Pin JST
MCBL-00022-2 is recommended.
Example using a wired ethernet adapter connected to J3 (Cable Creation USB to Ethernet)
Example using a wireless ethernet adapter connected to J3 (Alfa Network AWUS036ACS 802.11ac AC600)
Also do you have a pinout for the wiring on a Doodle Labs RM-1700-22M3 ?
Thankyou for your time.

Hello,

I need to confirm compatibility and required adapters for a VOXL 2 Mini with the MCCA-M0178-1 Starling LIOW2 ToF adapter board.

Current setup:

J6 and J7 are occupied by the MDK-M0188-2-00 Stinger image adapter
Connected to that adapter:

-2x MSU-M0166-1-01 AR0144 cameras on J6 and J10
-1x MSU-M0186-1-09 Caddx Polar camera on J1

• Also using a Doodle Labs Mini as the data link

Since J6 and J7 are already in use, I believe I may need the M0188 VOXL 2 Mini Sparrow Imager Adapter to interface through J2, J3, or J8.

Can you please confirm:

1. Whether the MCCA-M0178-1 is compatible with the VOXL 2 Mini
2. Which adapter is required
3. Which port should be used in this configuration

Thank you.