ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login
    1. Home
    2. Olivier GASTÉ
    • Profile
    • Following 0
    • Followers 0
    • Topics 1
    • Posts 1
    • Best 0
    • Controversial 0
    • Groups 0

    Olivier GASTÉ

    @Olivier GASTÉ

    0
    Reputation
    4
    Profile views
    1
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Olivier GASTÉ Unfollow Follow

    Latest posts made by Olivier GASTÉ

    • issue with orange apn

      hello every one,
      I've setup following the manual voxl lte modem board over a voxl fresh standard main board

      ~ # voxl-modem --feather_configure
      Configuring GPIO pins
          Setting defaults:
              GPIO_PIN_WWAN_WAKEUP_IN  = 1
              GPIO_PIN_WWAN_POWER_ON_N = 1
              GPIO_PIN_WWAN_RESET_N    = 1
          feather is DISABLED
      ENABLE WNC feather module
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is ENABLED, device detected: /dev/ttyUSB0
      

      according to this : https://assistance.orange.fr/mobile-tablette/tous-les-mobiles-et-tablettes/depanner/probleme-avec-un-service-d-orange-internet-sms-mms-mails-cloud-tv/mms/configurer-un-apn-internet-et-mms_192948-738196
      APN name for orange networks is 'orange'
      so I called set-apn.sh script with this (I also checked the AT+CGDCONT command on AT command guide of sierra WP7607)

      ~ # /usr/bin/set-apn.sh orange
      setting APN to orange
      

      after reboot I launch

      ~ # voxl-modem --connect_to_network
      Verifying configuration for connecting to network
      Configuration:
          --serial_port:       /dev/ttyUSB0
          --qmi_dev:           /dev/qcqmi0
          --network_interface: rmnet_usb0
          --uqmi_bin:          uqmi
          --modem_on_usb:      False
      Activating modem
      Configuring GPIO pins
          Setting defaults:
              GPIO_PIN_WWAN_WAKEUP_IN  = 1
              GPIO_PIN_WWAN_POWER_ON_N = 1
              GPIO_PIN_WWAN_RESET_N    = 1
          feather is DISABLED
      ENABLE WNC feather module
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is DISABLED
          feather is ENABLED, device detected: /dev/ttyUSB0
      Detecting feather modem:
      ERROR: The required modem was not detected.
      

      even if normaly it have to be negociated by PDP response I can try to force an IP in AT command AT+CGDCONT=1,"IP","orange","0.0.0.0",0,0,0,0

      is it normal that script sending command to ttyUSB2 instead of ttyUSB0 ??

      I also tried with another provider called bouygues : https://www.assistance.bouyguestelecom.fr/s/article/parametrage-mobile-email-mms-internet
      the apn name looks to be mmsbouygtel.com
      and I got same issue endding with :!

          feather is ENABLED, device detected: /dev/ttyUSB0
      Detecting feather modem:
      ERROR: The required modem was not detected.
      

      thank's for any help

      posted in Cellular Modems
      Olivier GASTÉO
      Olivier GASTÉ