I have a VOXL2 (M0054) board with a small SMD component near the J10 connector that was physically damaged by an accidental impact.

I removed the damaged component from the board. The component is approximately 2.0 mm × 1.0 mm, has multiple bottom pads (approximately 8 pads), and the top marking appears to be:

5BETB1

I have attached photos showing the component, its location on the VOXL2 board, and the PCB pads after removal.

The VOXL2 itself is still operating normally. J10 is currently not used in my application, so I cannot determine the function of this component from functional testing.

Could you please help identify this component and provide the following information, if possible?

Manufacturer and part number
Component type/function
Electrical specifications
Package type and pinout
Recommended replacement or compatible alternative

If the exact BOM part number cannot be disclosed, a compatible replacement specification would also be very helpful.

I would like to repair the board rather than replace the entire VOXL2.

Thank you for your help.!