<![CDATA[unbrick switch on custom add-on board]]>Hi,
We made our own add-on board for Voxl2. Now we want to add a switch, similar to SW2 on the Voxl2, to unbrick the board if needed.
I have seen that we can do it through pin 56 of connector J3. My questions:

  • list itemis this pin high active or low active?

  • list itemAre there resistors needed (like pull-up, pull-down, or in serie)?

  • list itemIf it is high-active, should I use pin 47 of J3?

Thanks

]]>https://forum.modalai.com/topic/5400/unbrick-switch-on-custom-add-on-boardRSS for NodeSat, 29 Aug 2026 06:08:58 GMTFri, 28 Aug 2026 13:36:43 GMT60