# Unbrick VOXL2 instruction help

Source: https://forum.modalai.com/topic/5251/unbrick-voxl2-instruction-help
Category: VOXL 2 and VOXL 2 Mini (https://forum.modalai.com/category/26/voxl-2-and-voxl-2-mini)
Tags: voxl-2
Posted: 2026-06-05 22:47:07 UTC by Engineer123
Replies: 1 · Views: 849

## Engineer123 · 2026-06-05 22:47:07 UTC

I am following these steps through a linux VM

https://docs.modalai.com/voxl2-unbricking/

and I am at the step that tells me to download a qdl image but I cannot find it. I tried to use the latest flat build image but it just hangs up and does nothing. Can someone assist with helping me find the image and process?

![image (13).png](https://forum.modalai.com/assets/uploads/files/1780699567815-image-13.png) 
![image (14).png](https://forum.modalai.com/assets/uploads/files/1780699602075-image-14.png)

## Reply by ZuraNeb (ModalAI staff) · 2026-06-23 16:18:16 UTC

@Engineer123 

You can download all the necessary flat build files from our page: [modalai.filecloudonline.com](link url). Go into flat builds folder and download the m0054(154-1) flat build file

With regards to actually flashing the flat build, and using modal-qdl repo:

1. Make sure to put the flat build file properly in a correct folder as mentioned by the doc (./qdl/qfil_app/modalai). Make sure the file is unzipped  (it should be m0054(154-1)/ all the files, NOT m0054(154-1)/m0054(154-1)/....)
2. Some users have seen a higher qdl success rate when they ran install_dependencies.sh and run.sh with sudo commands. So sudo might work better
3. Confirm that the voxl is in edl mode