# Need Camera connector details

Source: https://forum.modalai.com/topic/4932/need-camera-connector-details
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2025-12-17 05:49:09 UTC by Richa
Replies: 8 · Views: 1204

## Richa · 2025-12-17 05:49:09 UTC

We are designing one carrier board and wanted to use Camera module MSU-M0186-1-09. 
Could you please help me which mating connector we should use on our board to insert 26-pin the co-axial cable with our custom carrier board? 

Do let me know if more details are required.

## Reply by Alex Kushleyev (ModalAI staff) · 2025-12-20 06:12:37 UTC

@Richa , you should find information you need in the links below:

- https://docs.modalai.com/M0186/#module-connector-pinout-for-j1-s-h26-hr-ds-412
- https://docs.modalai.com/micro-coax-user-guide/

Alex

## Reply by Richa · 2025-12-23 06:34:49 UTC (in reply to Alex Kushleyev)

@Alex-Kushleyev 

Dear Alex,

I have gone through the link you have provided. Those link is not providing the specific information I required. 
We need to connect MSU-M0186-1-09 camera module on our custom carrier board. we do not want to use intermediate adapter boards.
SO we need part number for 26 pin mating connector which can attach with the MSU-M0186-1-09 camera cable?
Let me know if more details are needed.

Regards,
Richa

## Reply by Alex Kushleyev (ModalAI staff) · 2025-12-23 16:19:59 UTC (in reply to Richa)

Hello @Richa,

The documentation states the following: (https://docs.modalai.com/micro-coax-user-guide/)
- ModalAI uses Hirose DF56 series micro coaxial connectors for our adapters and cables

The part number for the coax mating connector is the following : `DF56C-26S-0.3V(51)`.

If you are designing a carrier board for VOXL2, you could request some help from our engineers to help review the design before you send it for manufacturing.

I hope that helps.

Alex

## Reply by Richa · 2025-12-24 11:38:17 UTC (in reply to Alex Kushleyev)

@Alex-Kushleyev 
We have ordered MSU-M0186-1-09 camera module and in image it shows co-axial cable attached to it.

Refer below image for your reference.
![dab370a1-ffd4-4ef1-bf62-d0875cfc1a76-image.png](https://forum.modalai.com/assets/uploads/files/1766576137667-dab370a1-ffd4-4ef1-bf62-d0875cfc1a76-image.png) 

So in this case our custom carrier board should have the mating part on which this co-axial cable should attach.
we are expecting that this kind of connector on our carrier board.
Please suggest the highlighted connector part number.
![51b4d090-2f84-4450-adc1-3063790ed9b9-image.png](https://forum.modalai.com/assets/uploads/files/1766576284473-51b4d090-2f84-4450-adc1-3063790ed9b9-image.png)

## Reply by Alex Kushleyev (ModalAI staff) · 2025-12-26 00:47:32 UTC (in reply to Alex Kushleyev)

> The part number for the coax mating connector is the following : `DF56C-26S-0.3V(51)`.
>

## Reply by Richa · 2025-12-26 07:05:12 UTC (in reply to Alex Kushleyev)

@Alex-Kushleyev 
Thank you!

What is the procedure to provide design for review?

## Reply by Richa · 2026-02-02 09:29:22 UTC (in reply to Richa)

What is the procedure to provide design for review?

## Reply by Vinny (ModalAI staff) · 2026-02-02 20:59:03 UTC (in reply to Richa)

Hi @Richa 
We have not provided our pinouts for this and have no plans to.
For our Micro Coax direct CMOS based sensors, you need to use our products end-to-end to guarantee functionality.

Hope this helps clarify.