# Missing Config File

Source: https://forum.modalai.com/topic/4629/missing-config-file
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2025-07-24 03:44:55 UTC by QSL
Replies: 4 · Views: 967

## QSL · 2025-07-24 03:44:55 UTC

Hi, 

I have a Starling 2 we just started getting acquainted with and I am not 100 percent sure what I did.  I was being very careful as I am green to much of this but I believe I somehow erased the 

/etc/modalai/voxl-vision-hub.conf

file.   I was using Nano to just look through it but not altering anything.  I believe I accidentally closed my terminal window and restarted a new one to then ssh back into Voxl over Wifi.  

When I went back to examine the config file again it was blank....

See screen shot attached

![Screenshot 2025-07-23 223812.png](https://forum.modalai.com/assets/uploads/files/1753328541233-screenshot-2025-07-23-223812.png) 

I am not sure what to do now in terms of best path to restoring it or steps to reconfiguration that wikl recreate it.

I also am wondering if I have another instance running on the Voxl that has the file open maybe?  If so I power cycled a few times but it still seems to be blank.  

Any assistance would be great!

## Reply by QSL · 2025-07-24 19:50:49 UTC

@Moderator any insight would be appreciated!

TIA

## Reply by tom (ModalAI staff) · 2025-07-25 16:17:57 UTC (in reply to QSL)

@QSL I would run `voxl-configure-mpa` and it'll reset all config files to default

## Reply by tom (ModalAI staff) · 2025-07-25 16:18:21 UTC (in reply to tom)

@tom Or if you don't want to reset all of them, you can just run `voxl-configure-vision-hub factory_enable`

## Reply by QSL · 2025-07-25 19:14:45 UTC (in reply to tom)

@tom said in [Missing Config File](/post/23296):
> voxl-configure-vision-hub factory_enable

thanks.  I tried the Sku Wizard then MPA but I seem to still have a blank file when I open it in nano.   I will try the factory default next.