# Connecting Video from Voxl 2 to Herelink 1.1

Source: https://forum.modalai.com/topic/4465/connecting-video-from-voxl-2-to-herelink-1-1
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2025-05-28 16:44:02 UTC by QSL
Replies: 3 · Views: 873

## QSL · 2025-05-28 16:44:02 UTC

We are trying to verify if we can use the smaller and easier to package VOXL 2 USB3.0 / UART Expansion Adapter with USB 3.0 being used to send the camera views to herelink via the ethernet port?

We were looking at using 

https://www.amazon.com/USB-Ethernet-Adapter-Gigabit-Switch/dp/B09GRL3VCN/

and of course the Herelink Adapter 

https://irlock.com/products/herelink-air-unit-v1-1-ethernet-cable?

We can use the larger breakout board with RJ45 connector but its very bulky and we are trying to package the voxl 2 in a space that this would not work for us.  

Thanks in advance for any help!

## Reply by QSL · 2025-06-13 20:28:08 UTC

@Moderator it would be great if we could get some assistance....

## Reply by tom (ModalAI staff) · 2025-06-13 20:35:30 UTC (in reply to QSL)

@QSL That would likely work, we just haven't used the herelink ourselves yet so can't provide too much guidance

## Reply by Idan Fiksel · 2025-07-15 15:58:08 UTC

What have you guys done to stream the video to QGC? do you use a wifi dongle?