# Micro-coax dual interposer board for M0166 cameras

Source: https://forum.modalai.com/topic/4393/micro-coax-dual-interposer-board-for-m0166-cameras
Category: VOXL SDK and Software (https://forum.modalai.com/category/47/voxl-sdk-and-software)
Tags: camera
Posted: 2025-05-05 14:34:49 UTC by SKA
Replies: 2 · Views: 893

## SKA · 2025-05-05 14:34:49 UTC

Is there a board available that is similar to the VOXL 2 Mini Dual High-res and Boson MIPI Adapter (MCCA-M0194-1) for tracking cameras?

We are looking to connect 2 M0166 cameras to a VOXL 2 Mini as a synced stereo pair without using the M0173 board. Thanks!

## Reply by Alex Kushleyev (ModalAI staff) · 2025-05-06 03:32:07 UTC

Hello @SKA ,

I will double check, but i do not think that we have what you are asking for. However, there is M0188 which will allow you to connect up to 4 M0166 tracking cameras and 2 M0161 hires cameras concurrently. Would that work for you? :)

https://docs.modalai.com/M0188/
https://www.modalai.com/products/m0188

Please note that if you use M0188, you will need to install the VOXL2 mini sdk and select the variant that supports M0188 (it uses a different kernel to map all the camera IO correctly).

Alex

## Reply by Vinny (ModalAI staff) · 2025-05-06 04:14:26 UTC

Hi @SKA 
Alex's instincts are correct, we do not have a smaller plug in board for just tracking in a synce'd config. We only had an M0155 for one image sensor for a while, so your best bet is what Alex said and get the new M0188 for VOXL 2 Mini (VOXL 2 uses M0173, whereas VOXL 2 Mini uses M0188)
It's quite cost competitive for what it does!!
https://www.modalai.com/collections/all/products/m0188