# Camera not recognized

Source: https://forum.modalai.com/topic/3998/camera-not-recognized
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2024-12-04 11:53:43 UTC by TomP
Replies: 2 · Views: 764

## TomP · 2024-12-04 11:53:43 UTC

Hello everyone,

We are using the Mini VOXL with the following setup:

Camera:

IMX412 Sensor COAX BD M0161
Connector:
M0155
Here are some pictures of the setup:

![SetUp](https://forum.modalai.com/assets/uploads/files/1733312591374-whatsapp-image-2024-12-04-at-12.40.26-pm-1-resized.jpeg) 
![Port Image](https://forum.modalai.com/assets/uploads/files/1733312847618-whatsapp-image-2024-12-04-at-12.46.49-pm-resized.jpeg) 

I need clarification about the connection. Do we need to align the number "59" written on the Mini VOXL with the connector for proper connection? Should they overlap, as shown in the image below?

![Possible Connection Possible](https://forum.modalai.com/assets/uploads/files/1733313067102-whatsapp-image-2024-12-04-at-12.49.54-pm-resized.jpeg) 

Any guidance on how to connect this correctly would be greatly appreciated.

Thanks in advance!

## Reply by modaltb (ModalAI staff) · 2024-12-05 18:21:02 UTC

Hi @TomP ,

The last image you have shows correct orientation, you can find "pin1" and align to that:

![804e60ec-632e-496e-a5f0-f29e4f85e9e9-image.png](https://forum.modalai.com/assets/uploads/files/1733422703082-804e60ec-632e-496e-a5f0-f29e4f85e9e9-image.png) 

For SW configuration, you want to have /usr/lib/camera/com.qti.sensormodule.imx412_fpv_0.bin for this setup off J6.  Reach back out if you get stuck here.

## Reply by Vinny (ModalAI staff) · 2024-12-06 17:46:02 UTC

HI @TomP 
Please remove all products off of the ESD static bags.
This bags are only used for unpowered storage/shipping when outside of a controlled ESD Work Area.
This site has a few good books you can try to pick up so your team is well prepared for ESD handling: https://www.techni-tool.com/category/Static-Protection/ESD-Training-And-Awareness-Materials