<![CDATA[M0173 VOXL 2 Front End - Pinouts for STM VL53L1CX Rangefinder]]>I have been following the development of the M0173 COAX connector board. I'm planning to integrate a Rangefinder with my existing setup consisting of VOXL2 compute for reliable height estimation in constrained environments.

At present I'm using the Image sensors from Starling 1 for my indoor flight requirements. I'm planning to upgrade to the new sensors(AR0144 Tracking, IMX412 - Hires with COAX connectors) with the COAX Cables.

I was checking for development of STM VL53L1CX rangefinder along with Flir Lepton (M0157 -1) board as well. I have few queries on this,

  1. Is the development for M0157 - 1 complete and when would it be released? Along with the new MDK-M0173 product would M0157 module also be available for purchase along with that in future?

Screenshot from 2024-10-28 12-03-36.png

  1. The M0157-1 uses a 8 pin JST-GH type connector MCBL-00105-1 for connecting between M0173 and the board itself. The schematics for this cable connector is not yet mentioned? Could you share the schematics?

Screenshot from 2024-10-28 12-05-16.png

]]>https://forum.modalai.com/topic/3890/m0173-voxl-2-front-end-pinouts-for-stm-vl53l1cx-rangefinderRSS for NodeTue, 19 May 2026 23:00:10 GMTMon, 28 Oct 2024 06:45:19 GMT60