# VOXL2 flash error

Source: https://forum.modalai.com/topic/3365/voxl2-flash-error
Category: VOXL 2 and VOXL 2 Mini (https://forum.modalai.com/category/26/voxl-2-and-voxl-2-mini)
Tags: voxl-2
Posted: 2024-04-26 17:34:19 UTC by Hyunsoo Kim 0
Replies: 7 · Views: 1586

## Hyunsoo Kim 0 · 2024-04-26 17:34:19 UTC

While flashing the voxl2 I am getting this error. Do you guys have any recommendation?

```
[WARNING] This system image flash is intended only for the following
          platform: VOXL2 (m0054) 

          Make sure that the device that will be flashed is correct.
          Flashing a device with an incorrect system image will lead
          the device to be stuck in fastboot.

Would you like to continue with the VOXL2 (m0054) system image flash?
1) Yes
2) No
#? 1
[INFO] checking partition system::0xD3B5D7000
[INFO] {system::0xD3B5D7000} partition returned size {0x1A435F3000}, expected {0xD3B5D7000}
[WARNING] Partition layout was found to be incorrect, this requires
          flashing the full partition table. Flashing the partition
          table will also flash every partition causing all data on
          the device to be lost.

When doing a full flash, make sure to backup any important files

Would you like to continue with the full wipe/flash now?
1) Yes
2) No
#? 1
[INFO] Found all required files

Flashing: modalai_conf | m0054-conf-fs.ext4
[--------------------------------------------------------        ]( 88%)

[ERROR] Failed to flash partition: modalai_conf

target reported max download size of 805306368 bytes
sending 'modalai_conf' (5176 KB)...
FAILED (remote: Error: Last flash failed : Volume Full)
finished. total time: 0.000s

```

## Reply by tom (ModalAI staff) · 2024-04-26 17:55:24 UTC

@Hyunsoo-Kim-0 Can you post a picture of your hardware setup so we can confirm you're flashing the correct image?

## Reply by Nathan Sullivan 0 · 2024-04-30 02:23:22 UTC (in reply to tom)

@tom I'm having the exact same message, host system is Ubuntu 23.10 x86_64, there's enough space on the local machine; screenshot of error and picture of board attached.

![voxl2.jpg](https://forum.modalai.com/assets/uploads/files/1714443766432-voxl2.jpg) 

![Screenshot from 2024-04-29 22-12-32.png](https://forum.modalai.com/assets/uploads/files/1714443799261-screenshot-from-2024-04-29-22-12-32.png)

## Reply by Nathan Sullivan 0 · 2024-04-30 02:35:01 UTC (in reply to tom)

@tom FYI 1.1.3-1 can be installed with no problems, board was previously on 1.1.2.

## Reply by tom (ModalAI staff) · 2024-04-30 22:20:05 UTC (in reply to Nathan Sullivan 0)

@Nathan-Sullivan-0 Interesting... can you try forcing the board into fastboot using the button https://docs.modalai.com/voxl2-voxl2-mini-system-image/#force-voxl-2-into-fastboot

then flashing and see if that changes anything? (make sure to select M0054-1 when prompted as your board has a QRB5165)

## Reply by Hyunsoo Kim 0 · 2024-05-09 00:02:54 UTC

I figured this out.. instead of flashing by sdk 1.2, first tried with 1.1.3. and then updated to sdk 1.2.
I hope this helps you

## Reply by Nathan Sullivan 0 · 2024-05-17 15:42:44 UTC (in reply to tom)

@tom Sorry, I've been out on a job OCONUS for the past two weeks. I tried the fastboot force, and that seemed to work - thank you!

## Reply by tom (ModalAI staff) · 2024-05-17 16:31:48 UTC (in reply to Nathan Sullivan 0)

@Nathan-Sullivan-0 Great! Thanks for the update