# OV9782 camera

Source: https://forum.modalai.com/topic/2837/ov9782-camera
Category: ESCs, Sensors and Accessories (https://forum.modalai.com/category/15/escs-sensors-and-accessories)
Tags: image-sensor
Posted: 2023-11-08 22:10:16 UTC by Sonoaero
Replies: 3 · Views: 957

## Sonoaero · 2023-11-08 22:10:16 UTC

What is the PN of the interposer required to connect the M0113 OV9782 camera to the VOXL mini

## Reply by Moderator (ModalAI staff) · 2023-11-09 05:03:44 UTC

Please see this doc for supported configurations https://docs.modalai.com/voxl2-camera-configs/

## Reply by Sonoaero · 2023-11-09 06:17:42 UTC (in reply to Moderator)

@Moderator 

All those configuration seems to be dual sensor cabling. Can I use the M0008 cable  (24 pin camera flex to 36 pin)   and the M0076 interposer on J6/J7 of  the VOXL2 mini?

## Reply by Vinny (ModalAI staff) · 2023-11-09 22:07:01 UTC (in reply to Sonoaero)

Hi @Sonoaero
That is a valid electrical connection scheme.
If you plug into either J6 or J7 of V2 Mini, you'll match the configuration shown here:
 https://docs.modalai.com/voxl2-mini-image-sensors/#tracking
Keeping in mind M0076 only picks up the "lower" CSI group functions.

I cannot advise as to how SW will work on this config switching from M0014 (OV7251) to M0113 (OV9782), but it is valid electrically. 

Hope this helps.
Thanks!