# Quick Cable Check

Source: https://forum.modalai.com/topic/2426/quick-cable-check
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2023-07-17 04:21:52 UTC by RykerBarthold
Replies: 3 · Views: 695

## RykerBarthold · 2023-07-17 04:21:52 UTC

Hi all, 

I currently am wanting to connect this [camera](https://www.modalai.com/collections/accessories/products/msu-00024-1?variant=44804551016752) to the VOXL2 Mini directly. 

I have found this [cable](https://www.modalai.com/collections/accessories/products/voxl-panasonic-to-molex-image-sensor-flex?_pos=13&_fid=b452914bf&_ss=c) and I want to just check to make sure that it will work directly between camera and processor. 

Thats all and thank you,

Ryker

## Reply by Vinny (ModalAI staff) · 2023-07-18 05:24:20 UTC

HI @RykerBarthold 
No, that will not work.
Please plan to use any of these cable/flex/PCB adapters we denote as "Voxl2" from this table
https://docs.modalai.com/image-sensor-flexes-adapters/#image-sensor-flex-catalog
Voxl2 and Voxl2-Mini use the same camera connectors and pinouts.
It just has one less than Voxl2.
Let us know if that helps!

## Reply by RykerBarthold · 2023-07-18 21:15:50 UTC

Understood. Just to double check this [Cable](https://www.modalai.com/collections/cables-1/products/msu-m0084) should work correct?

Thank you!

## Reply by Vinny (ModalAI staff) · 2023-07-19 15:46:52 UTC (in reply to RykerBarthold)

@RykerBarthold Yes, that's our long flex cable and will work. Be sure to pay attention to pin1 locations and please review the software pages on our Technical Docs to help you along with the camera setup.