# Snapdragon Flight Pro Setup Help

Source: https://forum.modalai.com/topic/1825/snapdragon-flight-pro-setup-help
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2023-02-14 16:52:45 UTC by snapdrone
Replies: 2 · Views: 445

## snapdrone · 2023-02-14 16:52:45 UTC

Hi All, I have a Snapdragon Flight Pro kit from Qualcomm laying around [(this one)](https://www.modalai.com/pages/qualcomm-flight-pro) and I was thinking of getting it up and running for a project. I was going to go ahead and buy the VOXL (as it seems the most similar in layout and capability) but figured I might try this board first. Is the setup/bringup the same? 

Would someone be able to point me in the right direction? [This link](https://docs.modalai.com/voxl-quickstarts/) looked like a good place to start but just wanted to be sure. 

Thank you.

## Reply by Chad Sweet (ModalAI staff) · 2023-02-14 22:45:23 UTC

Thanks for reaching out! If you purchased your kit from someone other than ModalAI, you will need to reach out to them for support.

## Reply by snapdrone · 2023-02-15 22:13:47 UTC (in reply to Chad Sweet)

@Chad-Sweet Thanks for your response. I don't know where it was purchased from but it is the same product as the one on the ModalAI link I included. https://www.modalai.com/pages/qualcomm-flight-pro

I'm not sure there's any other documentation out there that I can find. Is there any overlap between these products? They appear identical. 

Thanks!