<![CDATA[voxl-modem-start.sh issue]]>Hey,
i'm currently trying to do something similiar to modallink_relink.py, but i need the return value of voxl-modem-start.sh and it should be blocking, so i wanted to directly run that instead of using:

systemctl restart voxl-modem

But when i'm running voxl-modem-start.sh from voxl terminal i get the following error:
Screenshot from 2022-12-06 17-31-22.png

the modem is configured and with the service file it works. I also tried playing around with the if conditions in voxl-modem-start.sh but without success.

System Image: 3.8.0
voxl-modem Version: 0.16.1

]]>https://forum.modalai.com/topic/1599/voxl-modem-start-sh-issueRSS for NodeTue, 10 Mar 2026 03:17:40 GMTTue, 06 Dec 2022 16:41:46 GMT60<![CDATA[Reply to voxl-modem-start.sh issue on Wed, 07 Dec 2022 09:40:02 GMT]]>@tom Now it's working again, but might be worth a look, it's important that it always works. Parsing seems fine:

apq8096 detected...
'v2'
len: 2

Initializing v2 modem...

Waiting for ttyUSB2...
ttyUSB2
]]>https://forum.modalai.com/post/7420https://forum.modalai.com/post/7420Wed, 07 Dec 2022 09:40:02 GMT<![CDATA[Reply to voxl-modem-start.sh issue on Tue, 06 Dec 2022 16:49:45 GMT]]>@Philemon-Benner Hmm it’s reading from /etc/modalai/voxl-modem.conf

I wonder if something funky is going on with the config file formatting.

]]>https://forum.modalai.com/post/7405https://forum.modalai.com/post/7405Tue, 06 Dec 2022 16:49:45 GMT