# HDMI-CSI bridge driver on VOXL2

Source: https://forum.modalai.com/topic/1491/hdmi-csi-bridge-driver-on-voxl2
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2022-10-28 07:51:38 UTC by DanielHviid
Replies: 5 · Views: 1107

## DanielHviid · 2022-10-28 07:51:38 UTC

Hi,

I'm looking at using the VOXL2 as a flight controller for a fixed wing UAS using a gimbal camera with an HDMI output. I see that the HDMI input accessory for the VOXL was discontinued, is there any HDMI-CSI bridge drivers available for the VOXL2, or are there any plans for developing any such drivers?

## Reply by Chad Sweet (ModalAI staff) · 2022-10-28 16:34:06 UTC

We have had much better success using HDMI to USB 3 adapters and voxl-uvc-server, so we are focused on that for HDMI support for the time being. It is smaller, cheaper and more robust.

## Reply by 황인호 · 2023-02-02 02:51:39 UTC (in reply to Chad Sweet)

@Chad-Sweet 

Where can I connect 'HDMI to USB 3 adapter' to VOXL2 board?

![m0054-exploded-v1.3-rev0.jpg](https://forum.modalai.com/assets/uploads/files/1675306267606-m0054-exploded-v1.3-rev0.jpg)

## Reply by Chad Sweet (ModalAI staff) · 2023-02-02 03:06:31 UTC

This exposes a USB 3 host which is a good way to connect https://docs.modalai.com/voxl2-usb3-uart-add-on/

## Reply by 황인호 · 2023-02-02 04:48:22 UTC (in reply to Chad Sweet)

@Chad-Sweet 

Thank you for reply.
But, If I use this USB 3 adapter, 5G modem board is not useable. Right?

## Reply by 황인호 · 2023-02-02 05:23:04 UTC (in reply to Chad Sweet)

@Chad-Sweet 

I found this. The 5G modem board also has a USB 3 port.
![캡처.JPG](https://forum.modalai.com/assets/uploads/files/1675315192006-캡처.jpg) 

Then, all I need is this cable.
https://www.modalai.com/collections/cables-1/products/mcbl-00022