# full-flash.sh occur Last flash failed:Volume Full

Source: https://forum.modalai.com/topic/1486/full-flash-sh-occur-last-flash-failed-volume-full
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2022-10-27 06:36:53 UTC by yitakabe
Replies: 3 · Views: 1082

## yitakabe · 2022-10-27 06:36:53 UTC

[https://docs.modalai.com/Qualcomm-Flight-RB5-system-image/](link url)

tar -xzvf M.m.b-M0052-9.1-perf.tar.gz
cd M.m.b-M0052-9.1-perf
sudo ./full-flash.sh
![75f326f24b57ef1b6dfa7a4f6f241d9.jpg](https://forum.modalai.com/assets/uploads/files/1666852561634-75f326f24b57ef1b6dfa7a4f6f241d9.jpg)

## Reply by Guest · 2022-10-27 16:31:50 UTC

Hello,

I'm assuming the issue here is that your RB5 had a 14.1a chipcode system image already flashed. The system image you are trying to install is 9.1 chipcode based. The difference is that the 14.1a chipcode system image contains a new partition layout which is most likely why you're seeing the ```Volume Full``` issue.

14.1a chipcode system images come with the voxl-sdk. You should install the latest [RB5 Platform 1.3.1-0.8](https://developer.modalai.com/asset/3). Let me know if you see any issues with this.

## Reply by yitakabe · 2022-10-28 01:04:34 UTC (in reply to Guest)

@Hector-Nevarez Cannot run factory reset without saved factory mode! How to do?

## Reply by tom (ModalAI staff) · 2022-10-28 16:38:44 UTC

@yitakabe Can you post either a screenshot or copy/paste the error you're seeing?