# hires camera crashes camera server

Source: https://forum.modalai.com/topic/1295/hires-camera-crashes-camera-server
Category: General Questions (https://forum.modalai.com/category/2/general-questions)
Posted: 2022-09-05 23:01:22 UTC by vivek rk
Replies: 1 · Views: 539

## vivek rk · 2022-09-05 23:01:22 UTC

I was working on streaming the hires camera frames to ROS and i noticed that whenever i try to read from the hires pipe, the camera server crashes. I have identified the following 

1. I dont think its a hardware issue as i tried connecting my board with a brand new camera without any flex cable extension and the issue persists. I am also facing this problem with 3 other boards

2. When the camera server is started, i get a few seconds worth of frames and then the crash happens. If I have the voxl portal open with the option to view the hires selected and then start the camera server i can see the camera frames for a few seconds and then it freezes. While the camera server is frozen, I see the stream from the tracking and stereo seem fine for a few more seconds after which all camera streams stop and the camera server crashes

3. The error seen is -19 which can be seen by starting the camera server using -d 0 parameter and when checking the journalctl for the camera server i see the following
Sep 05 22:24:10 voxl6 bash[2117]: Segmentation fault:
Sep 05 22:24:10 voxl6 bash[2117]: Fault thread: CAM_METADATA(tid: 3214)
Sep 05 22:24:10 voxl6 bash[2117]: Fault address: 0x581
Sep 05 22:24:10 voxl6 bash[2117]: Unknown reason

4. I have also tried updating to the latest firmware v3.8.0-0.7

5. I tried multiple resolution configuration (640x480, 1280x720, 1920x1080 and 4000x3000)

If anyone can help me out, that would be appreciated

Regards
Vivek

## Reply by vivek rk · 2022-09-11 20:39:28 UTC

@vivek-rk For anyone looking for a quick fix, you can use the voxl rtsp server for the hires only, for MPA support use the add-mpa-support branch