Subcategories

• PX4 Autonomy Developer Kit

  Product related questions and answers

  6
  Topics
  40
  Posts

  M

  @Eric-Katzfey
  Hi,
  The first change of flight mode to "Altitude" was because of the loss of control of pilot (see it from the "Manual Control Output") on the drone.
  This wasn't happened first time, I experienced the same before this flight too.

  The steps you provided aren't suitable, I can't do the flights like "Manual" and then verify everything everytime, this is a random behavior, even if I try in the manual mode and get a good flight, I can still experience the bad flight afterwards.

  When I get the bad VIO data, I get the message of "invalid setpoints" in the log and over the QGC too and the drone goes into the "altitude" mode.

  But, the problem I shared here is the loss of control over the drone, drone kept going upwards and even pulling the throttle to "0" isn't bring the drone to ground.

  You can clearly see, even in the altitude flight mode (2nd time), the drone still kept going upwards at "0" throttle.

  Please get us a fix for this.

• VOXL Accessories

  Microhard Modems Cellular Modems Power Modules Image Sensors
  154
  Topics
  820
  Posts

  V

  @Denver-Bennett Great, glad to hear that helped!

• VOXL Compute & Autopilot

  Product related questions and answers

  VOXL 2 Mini VOXL 2 VOXL Flight VOXL Flight Core v2 Flight Core VOXL 2 IO Flight Core - ArduPilot
  747
  Topics
  3781
  Posts

  A

  @Aaky , I am glad you figured it out. Most of the time the unexpected reboots are due to some sort of power issue, that is why I originally asked about the source of power - sometimes if a Power supply is used to power VOXL2, if the power supply cannot provide sufficient current, the system will reset. But sometimes, cabling is the issue.

  Alex

• VOXL Dev Kits

  Product related questions and answers

  VOXL-CAM VOXL Flight Deck
  151
  Topics
  680
  Posts

  H

  @tom Thank you so much!
  I was having the exact same problem with @marian.
  I could connect to the voxl via ssh but could not via adb shell.
  But could solve it after removing the /etc/udev/rules.d/51-android.rules.
  Try to remove the file, who are facing the same problem with me.

• VOXL Dev Drones

  Product related questions and answers

  Starling Sentinel VOXL m500 Reference Drone Qualcomm Flight RB5 5G Drone Seeker
  343
  Topics
  1848
  Posts

  D

  I see that the Starling 2 drone is utilizing a lot of micro coax cables for board and camera inter-connections. Are these special cables or are the freely available from you or a vendor? Do you have upcoming plans to use them more?

• ESCs
  54
  Topics
  456
  Posts

  R

  @Alex-Kushleyev Thanks Alex, We will test it out. In the meantime my team will be sending the first FPV 4n1 ESC back, so you can investigate onsite.

  Thank you,
  RDJ